Floor Patching Compound in Singapore

Cemimax patching compounds repair cracks, holes and low spots in concrete subfloors before new flooring goes down. Fast setting PP4 and PP5 get floors ready for vinyl, carpet, tile or timber in about 15 minutes.

Cemimax Floor Patching Compounds

2 products

Fast drying patching compound for interior substrates. Feather edge to 1/2 inch, floor covering ready in 15 minutes.

  • Feather edge to 1/2 inch (12.7 mm) in one application
  • Floor covering ready in 15 minutes
  • Smooth creamy formulation
  • Low to no VOC

Rapid repair patching and smoothing compound. Feather edge to high fill depth, sets within 15 minutes.

  • Feather edge to high fill depth in one application
  • Fast setting within 15 minutes
  • Superior bonding that eliminates the need for primer in most applications
  • Low to no VOC for healthy indoor air quality
  • Suitable for interior and exterior use

About patching

Repair and Smooth Your Subfloor Before Flooring

Patching compounds fill cracks, holes, joints and low spots in the subfloor before new flooring is installed. Skipping this step lets defects show through thin floor coverings such as vinyl, and can cause bubbling, shifting or lifting over time.

 

For local repairs, use Cemimax PP4 or PP5. For a whole room that is uneven, patch the worst areas first and then apply a Cemimax self leveling compound for a completely flat base.

Floor primer being rolled onto a concrete subfloor before self leveling

Why Cemimax

Why Choose Cemimax Patching Compounds?

Reliable bonding for every flooring project in Singapore — from homes to high-traffic commercial spaces.

01

Ready in About 15 Minutes

PP4 and PP5 set fast, so you can patch and move on to priming, levelling or flooring the same day.

02

Feather Edge to Deep Fill

Smooth feather edges with PP4, or fill deeper holes with PP5, both in one application.

03

Low VOC for Indoor Spaces

Low to no VOC formulas suited to homes, offices, schools and healthcare interiors.

04

Part of a Complete System

Works with Cemimax primers, self leveling compounds and adhesives from one supplier in Aljunied.

Why it matters

Why patching compounds are important

01

Smooth surface preparation

Fills cracks and holes so flooring adheres properly without bubbling, shifting or lifting.

02

Quick and efficient repairs

Fast application and drying get the floor back to a stable state with minimal downtime.

03

Enhances durability

Repairs before installation help adhesives bond securely and extend floor life.

04

Small and large repairs

From a single crack to larger damaged areas — one versatile solution.

FAQ

Floor Patching Compound FAQs

Common questions from contractors, designers and homeowners in Singapore.

What is a floor patching compound used for?

It fills and repairs cracks, holes, joints and imperfections in the subfloor, creating a smooth surface for vinyl, carpet, tile or timber flooring.

Yes. Cemimax patching compounds are designed for concrete and cement based subfloors.

PP4 is ready for floor covering in about 15 minutes, and PP5 sets within about 15 minutes. Times vary with depth, temperature and humidity.

Patching compound is best for local repairs such as cracks, holes and small low spots. To level a whole room or large uneven area, use a Cemimax self leveling compound such as DL24, DL30 or DL59.

PP5 bonds without primer in most applications. On very porous surfaces, or with PP4, a primer such as Cemimax DP101 may be recommended. Check the technical data sheet for your substrate.

PP4 is a fast drying interior patching compound that feathers to 12.7 mm. PP5 is a rapid repair compound for higher fill depths, works indoors and outdoors and needs no primer in most applications.

Yes. Once set and covered with the right Cemimax self leveling compound and adhesive, patched areas form part of a strong, durable floor system for commercial spaces.

Get Started with Cemimax Patching Compounds

Tell us the size and depth of the repair, or send us a photo. We will recommend PP4 or PP5 and send pricing.