Mon – Fri · 8:30 AM – 6 PM
Home / Self Leveling Compounds
Self-levelling cement and floor screed compounds for concrete subfloors in residential and commercial projects.
4 products
Self leveling polishable decorative overlay in three shades of grey. Up to 35 MPa, walkable from 2 hours.
Quick-setting, economical smoothing compound for normal-traffic areas and renovations.
Advanced cement and polymer-based compound for interior floor leveling from 1 to 30 mm.
High-strength compound for high-traffic areas. Up to 45 MPa, walkable in 2 hours.
About self-levelling
A self-levelling compound is a polymer-modified, cement-based material that spreads by itself to form a flat, level surface — no manual trowelling like traditional screeds.
Cemimax formulations combine excellent flow, high compressive strength and quick setting to create a flawless, stable base over concrete, screed or existing floors.
Why Cemimax
Professional-grade compounds trusted across Singapore, Australia and the Asia-Pacific.
01
Formulated so floors stay stable and moisture-resistant in humid environments.
02
A smooth, long-lasting base that resists wear — including high-traffic areas.
03
Spreads evenly with minimal preparation and cures quickly for faster turnaround.
04
The go-to brand for flooring contractors and builders across Singapore.
Installation
01
Ensure the surface is clean, dry and sound. Repair cracks, then apply a suitable Cemimax primer and let it dry.
02
Add powder to clean, cool water at the labelled ratio. Mix 2–3 minutes with a low-speed drill until lump-free.
03
Pour onto the prepared subfloor in sections and spread with a trowel or gauge rake to the required thickness.
04
Let it self-smooth and use a spike roller to release air. Keep off until cured; apply a second layer if needed.
FAQ
Common questions from contractors, designers and homeowners in Singapore.
A cement-based material poured over an uneven subfloor. It spreads easily and fills imperfections, giving the final floor a stable base.
Yes. Cemimax self-levelling compounds are designed for concrete subfloors.
Most products are walkable in 2–4 hours, with full cure in 24–48 hours depending on product and conditions.
Yes. DL59 is designed for high-traffic areas with excellent durability and strength.
Mix with water, pour onto the floor and let it spread naturally — it self-levels and fills gaps.
Yes. CemITOP can be polished to a smooth, glossy finish.
Share your floor area, thickness and covering — we'll recommend the right compound.