Ultramax MS Adhesive Sealant

Allow the adhesive to come to room temperature before use. Pull off the foil cover after opening and remove any surface skin without mixing it in. Apply an even coat onto the substrate using a suitable notched trowel: a B3 (3 mm) trowel over plywood or particleboard and a B5 (5 mm) trowel for direct stick to concrete. For moisture seal and vapour barrier use a B5 or 5 mm V-notched trowel and ensure full coverage. Do not apply more adhesive than can be laid within the working time. Place the timber onto the adhesive immediately and press down well. Best applied at 18 to 25°C with floor temperature above 15°C and relative humidity below 65%. Hardened adhesive can only be removed mechanically.